EPSIZE=_8_BYTE, EPTYPE=CTRL, EPDIR=OUT, NBTRANS=_0_TRANS, EPBK=_1_BANK
Device Endpoint Configuration Register (n = 0) 0
| ALLOC | Endpoint Memory Allocate |
| EPBK | Endpoint Banks 0 (_1_BANK): Single-bank endpoint 1 (_2_BANK): Double-bank endpoint 2 (_3_BANK): Triple-bank endpoint |
| EPSIZE | Endpoint Size 0 (_8_BYTE): 8 bytes 1 (_16_BYTE): 16 bytes 2 (_32_BYTE): 32 bytes 3 (_64_BYTE): 64 bytes 4 (_128_BYTE): 128 bytes 5 (_256_BYTE): 256 bytes 6 (_512_BYTE): 512 bytes 7 (_1024_BYTE): 1024 bytes |
| EPDIR | Endpoint Direction 0 (OUT): The endpoint direction is OUT. 1 (IN): The endpoint direction is IN (nor for control endpoints). |
| AUTOSW | Automatic Switch |
| EPTYPE | Endpoint Type 0 (CTRL): Control 1 (ISO): Isochronous 2 (BLK): Bulk 3 (INTRPT): Interrupt |
| NBTRANS | Number of transactions per microframe for isochronous endpoint 0 (_0_TRANS): Reserved to endpoint that does not have the high-bandwidth isochronous capability. 1 (_1_TRANS): Default value: one transaction per microframe. 2 (_2_TRANS): Two transactions per microframe. This endpoint should be configured as double-bank. 3 (_3_TRANS): Three transactions per microframe. This endpoint should be configured as triple-bank. |